SPAN INFORMATION

Length of Trapeze (in Feet)

Location of Point Load (Centered is Worst Case Condition)

TRAPEZE MATERIAL

Schedule 40 Pipe Schedule 30 Pipe Schedule 10 Pipe Dyna-Flow Pipe Dyna-Thread Pipe 1-5/8 Wide Strut Trapeze Material Type

1-inch 1.25-inch 1.5-inch 2-inch 2.5-inch 3-inch 3.5-inch 4-inch 5-inch 6-inch 8-inch 1-5/8-inch Tall 2-7/16-inch Tall 3-1/4-inch Tall Trapeze Size/Depth

Section Modulus of Trapeze Material

PIPE TO BE SUPPORTED

Schedule 40 Pipe Schedule 30 Pipe Schedule 10 Pipe Dyna-Flow Pipe Dyna-Thread Pipe Piping Material to be Supported

1-inch 1.25-inch 1.5-inch 2-inch 2.5-inch 3-inch 3.5-inch 4-inch 5-inch 6-inch 8-inch Size of Pipe being supported

Weight per Foot

Length of Pipe (NFPA Tables are based on 15-feet of pipe)

Adjusted Point Load (1.0 Safety Factor plus an additional 250lb load)

MIN REQ'D MODULUS

Minimum Required Section Modulus for a maximum allowable bending stress of 15 kpsi with the adjusted trapeze length and point load location.